The power supply is for my synthesizer a separate module.
inside are two T-60 c Mean Well switching power supplies (not connected in parallel!) Both +15 V, -15 V, +5 V.
are located on the front panel power socket, on / off switch for each power supply and a primary-side control. And just because I often play my synthesizer and out of the knobs and patch cables, each power supply, an ammeter with whom I can measure either (change) the currents to the positive or negative 15 V supply voltage.
Five other cases can be supplied through the 4-pin XLR connector with power, each power supply so the modules of three cases.
Five other cases can be supplied through the 4-pin XLR connector with power, each power supply so the modules of three cases.
0 comments:
Post a Comment